Adding Staples
• When closing the finisher, keep hands clear of the finisher's upper surface.
• Stapling failures or jams may occur if you use a staple cartridge other than that recommended.
Follow the instruction on the screen regarding how to add staples.
• If you cannot pull out the upper unit, there are staples remaining inside the cartridge. Use all the
staples, and do not add more.
Replacing Other Consumables
Refer to the maintenance guide provided with the new items for the replacement.
• Do not incinerate toner (new or used) or toner containers. Doing so risks burns. Toner will ignite
on contact with naked flame.
• Store toner (new or used), toner containers, and components that have been in contact with
toner out of reach of children.
• The fusing unit becomes very hot. When installing a new fusing unit, turn off the printer and wait
at least an hour after power off before replacing parts. Not allowing the printer to cool may
result in burns.
• Exposure to light reduces drum unit performance. Replace the unit as quickly as possible.
• Do not pull out the drum unit quickly or with force as it may fall.
• Take care that nothing comes into contact with the photo conductor area of the drum unit.
• When taking the drum unit out of the box, be sure to hold the unit by the handle on the top of the
unit. Do not touch any parts of the drum unit.
• Place no objects on the front or inner cover.
• Waste toner bottles cannot be reused.
1. Getting Started
40
To Next Page
Loading...
Need help?
General
Weight and Dimensions
