When a Status Icon Is Displayed
This section describes the status icons displayed when the machine requires the user to remove misfed
paper, to add paper, or to perform other procedures.
Status Icon Status
: Paper Misfeed icon Appears when a paper misfeed occurs.
For details about removing jammed paper, see page 92
"Removing Jammed Paper".
: Load Paper icon Appears when paper runs out.
For details about loading paper, see page 43 "Loading
Paper".
: Add Toner icon Appears when toner runs out.
For details about adding toner, see page 38 "Adding
Toner".
: Add Staple icon Appears when staples run out.
For details about adding staples, see page 40 "Adding
Staples".
: Waste Toner Full icon Appears when the waste toner bottle is full.
For details about replacing the waste toner bottle, see
Maintenance Kit SP 8400A.
: Hole Punch Receptacle Full icon Appears when the hole punch receptacle is full.
For details about removing punch waste, see "Removing
Punch Waste", Operating Instructions.
: Service Call icon Appears when the machine is malfunctioning or requires
maintenance.
: Open Cover icon Appears when one or more covers of the machine are
open.
3. Troubleshooting
66