Rigol DL3000 User Manual

Chapter 2 Front Panel Operations RIGOL
DL3000 User’s Guide 2-89
the load will enter its corresponding interface. (Note: The load will enter the
guide interface (if any) first.)
Delete
You can delete the files in Disk C and D, as well as the empty folders in Disk D.
Operation Procedures:
1. Press Store on the front panel of the load to enter the storage and recall
interface.
2. Press Cursor to switch to the directory, and select the directory where the file to
be deleted, and then press Cursor again to select the file to be deleted or select
the empty folder.
3. Press Delete, and then a prompt message "Delete the file?" is displayed. You
can press OK to delete the currently selected file or the empty folder; press
Cancel to give up deleting files or folders.
Copy and Paste
You are only allowed to copy the files from Disk C and paste them to Disk D.
Operation Procedures:
1. Press Store on the front panel of the load to enter the storage and recall
interface.
2. Press Cursor to switch to the directory and select Disk C, and then press
Cursor again to select the file to be copied.
3. Press Copy to copy the currently selected file.
4. Press Cursor to switch to the directory and select Disk D.
5. Press Paste to paste the copied file to Disk D. After you successfully completed
the copy and paste operation, a prompt message "Files copied successfully!" is
displayed.
If the same file is found in Disk D, a prompt message "Overwrite the existing
file?" is displayed. Press OK to overwrite the existing file; press Cancel to give
up the pasting operation.

Rigol DL3000 Specifications

General

Brand	Rigol
Model	DL3000
Category	Measuring Instruments
Language	English