Rigol DL3000 User Manual

RIGOL Chapter 2 Front Panel Operations
2-108 DL3000 User’s Guide
Option Configuration
DL3000 series electronic load provides the following options:
 LAN: Connect the load to the PC or the local area network (LAN) where the PC
resides to realize remote control.
 Digital I/O: provides the trigger input and output function.
 High Readback Resolution: improves the resolution of the instrument.
 High Frequency: provides the high frequency option.
 High SlewRate: provides the high slew rate option.
If you need any of these options, order them according to the Order No. available in
"Appendix A: Order Information", and then install the options according to this
section.
Press Utility to enter the system utility function interface. Then, press Option to
enter the option tab, as shown in Figure 2-60.
Figure 2-60 System Option Tab
In the system option tab, you can view the installation status of all options (Official,
Trial, Not Installed) and install the options.
To install an option, you need an option license (each instrument has a unique
license). The option license code is a 28-character string, which consists of English
letters and numbers. After you purchase an option, you will obtain a key (used for
obtaining the option license code). Then, you can install the license according to the
following steps.
1. Obtain an option license
(1) Log in to the RIGOL official website (www.rigol.com
), click SERVICE 
Software License Register to enter the "Registered product license
code" interface.
(2) In the interface, enter the correct key, serial number (press Utility, and
then press System Info to enter the system information tab to obtain the

Rigol DL3000 Specifications

General

Brand	Rigol
Model	DL3000
Category	Measuring Instruments
Language	English