Rigol DL3000 User Manual

RIGOL
VI DL3000 User’s Guide
DL3000 Series Overview
DL3000 is a cost-effective programmable DC electronic load with high performance.
With a user-friendly interface and superb performance specifications, DL3000 series
provides various interfaces for remote communication to meet your diversified test
requirements. It can be widely used in various industries, such as automotive
electronics, aerospace, and fuel cells.
Main Features:
 DL3021/DL3021A: single channel, DC 150 V/40 A, total power up to 200 W
 DL3031/DL3031A: single channel, DC 150 V/60 A, total power up to 350 W
 Dynamic mode: up to 30 kHz
 Adjustable current rising speed: 0.001 A/μs to 5 A/μs
 Min. readback resolution: 0.1 mV, 0.1 mA
 4.3-inch TFT LCD, capable of displaying multiple parameters and states
simultaneously
 Overvoltage/overcurrent/overpower/overtemperature/reverse voltage
protection
 4 static modes: CC, CV, CR, CP
 3 dynamic modes: continuous, pulsed, toggled
 List function supports editing as many as 512 steps
 Battery test function, OCP test, OPP test, factory test function, etc.
 Short-circuit test function
 Power-off memory function
 Built-in RS232/USB/LAN communication interface
 USB-GPIB interface converter (optional)

Rigol DL3000 Specifications

General

Brand	Rigol
Model	DL3000
Category	Measuring Instruments
Language	English