Selecting Parameters
117
5. When you want to end the Ad-Hoc mode connection,
restore the iPhone settings in [Settings] g [Wi-Fi] g
[Choose a Network] to their previous state.
NOTE
The Ad-Hoc Mode ON g OFF setting will take eect after you’ve
turned the unit o, then back on again.
Checking the IP Address and MAC Address
(WIRELESS INFO)
Here’s how to check the IP address and MAC address.
1. Select the [MENU] button g “17 Wireless” g“17.1 Wireless
I n f o ”.
MEMO
The MAC address shows the value indicated on the bottom of
the wireless USB adapter (WNA1100-RL; sold separately).
How to Save System Parameters
1. Modify all parameters you would like to use.
2. Press and hold the [MENU/WRITE] button to jump to the
“Write” page.
The display shows the following page.
3. Use the [DATA/ENTER] knob to select “System”.
4. Press [WRITE] to proceed.
The following page appears:
5. Use the [DATA/ENTER] knob to select the group of data
you need to save.
At default all group are selected (“Yes”).
6. Press the [WRITE] button to save the parameter groups.
After a while the display briey conrms the operation and the
returns to the main page.