Roland V-combo VR-730 User Manual

Getting Ready
12
Using the Included USB Memory
Protector
You can use the included USB memory protector to prevent theft of
the USB ash drive connected to the VR-09.
NOTE
• You must use the included screws.
• You must use the included Allen wrench to tighten or remove
the screws. Using a tool that does not match the screw heads
will damage them.
• Be careful not to over-tighten the screws. Doing so may damage
the screw’s head, causing the wrench to rotate uselessly.
• To tighten the screws, turn the Allen wrench clockwise. To
loosen the screws, turn the Allen wrench counter-clockwise.
loosen tighten
• Keep the removed screws out of the reach of small children to
ensure they are not swallowed accidentally.
• Never allow foreign objects (e.g., coins, wires) to enter the USB
memory box.
• When opening/closing the USB ash drive cover, please be
careful not to get your ngers pinched between the movable
part and the panel. In places where small children are present,
make sure that an adult provides supervision and guidance.
VR-09 only

Roland V-combo VR-730 Specifications

General

Equalizer	Yes
Product type	Digital synthesizer
Product color	Black
Sound effects	Compression, Delay, Overdrive, Reverberation
Sound effects quantity	268
Keyboard number of keys	73
Maximum polyphony (notes)	128
Reverberation effects quantity	6
USB ports quantity	2
6.35 mm (1⁄4-inch) input	1
Battery type	AA
Operating time	5 h
Power source type	AC, Battery
Number of batteries supported	8

Weight and Dimensions

Depth	366 mm
Width	1215 mm
Height	124 mm
Weight	9900 g