Roland V-combo VR-730 User Manual

41
Convenient Functions
Making the Power Automatically Turn
O After a Time (Auto O)
With the factory settings, the unit’s power will automatically be
switched o a certain amount of time after you stop playing or
operating the unit.
If you don’t need the power to turn o automatically, set “Auto O”
to the “OFF” setting as described below.
1. Press the [MENU] button.
2. Turn the [VALUE] dial to select “System.”
3. Press the [ENTER] button.
4. Use the CURSOR [ ] [ ] buttons to select “Auto O.”
5. Turn the [VALUE] dial to change the setting.
Value Explanation
OFF The power will not turn o automatically.
10 min
The power will automatically turn o if no
operation is performed for 10 minutes.
30 min
The power will automatically turn o if no
operation is performed for 30 minutes.
240 min (default)
The power will automatically turn o if no
operation is performed for 240 minutes (4 hours).
6. Press the [EXIT] button several times to nish the
procedure.
Adjusting the Brightness of the
Display (LCD Contrast)
Use this setting to adjust the brightness of the screen.
1. Press the [MENU] button.
2. Turn the [VALUE] dial to select “System.”
3. Press the [ENTER] button.
4. Use the CURSOR [ ] [ ] buttons to select “LCD Contrast.”
5. Turn the [VALUE] dial to change the setting.
Value 0 (dark)–30 (bright)
6. Press the [EXIT] button several times to nish the
procedure.
Saving Registrations to a USB Flash
Drive (Save Registration)
All registrations stored in this unit can be saved to your USB ash
drive as a set (registration set).
1. Connect a USB ash drive (sold separately) to the USB
MEMORY port (p. 6).
2. Press the [MENU] button.
3. Turn the [VALUE] dial to select “Media Utility.”
4. Press the [ENTER] button.
5. Use the CURSOR [ ] [ ] buttons to select “Save
Registration.”
6. Press the [ENTER] button.
The SAVE REGISTRATION screen appears.
7. Turn the [VALUE] dial to select the save-destination number.
Numbers for which a registration set name is shown already contain
a saved registration set.
If you select a previously-saved registration set as the save-
destination, the previously-saved registration set will be overwritten.
If you don’t want to overwrite it, select a number for which “----------”
is shown as the save-destination.
8. Press the [ENTER] button.
If you select a number in which a registration set is already saved,
the display will ask “Overwrite Registration OK?”
If you are sure you want to overwrite it, press the [ENTER] button. If
you decide to select a dierent number, press the [EXIT] button.
9. Assign a name to the registration set.
Button/Dial Operation
CURSOR [
] [ ]
buttons
Select the character that you want to change.
[VALUE] dial Changes the character.
MODE [ORGAN] (Del)
button
Delete the character.
MODE [PIANO] (Space)
button
Inserts a space.
10. Press the [ENTER] button or the MODE [SYNTH] (Save)
button.
The registration set will be saved.
NOTE
Do NOT turn o the power or disconnect the USB ash drive
while “Executing...” is displayed.
11. Press the [EXIT] button several times to nish the
procedure.
Introduction Performing Recording Looper Settings
Appendix

Roland V-combo VR-730 Specifications

General

Equalizer	Yes
Product type	Digital synthesizer
Product color	Black
Sound effects	Compression, Delay, Overdrive, Reverberation
Sound effects quantity	268
Keyboard number of keys	73
Maximum polyphony (notes)	128
Reverberation effects quantity	6
USB ports quantity	2
6.35 mm (1⁄4-inch) input	1
Battery type	AA
Operating time	5 h
Power source type	AC, Battery
Number of batteries supported	8

Weight and Dimensions

Depth	366 mm
Width	1215 mm
Height	124 mm
Weight	9900 g