30
Creating a Patch
Saving Patches (PATCH Write)
After you have assigned a name to the patch, save it in patch number 512.
1
Make sure that the patch you want to save is selected.
2
Touch <▼> in the upper left area of the display.
A pulldown menu appears.
fig.Q-38a_60
3
Touch <PATCH Write> in the pulldown menu.
The PATCH Write window appears.
fig.Q-39_60
4
To select the memory location in which the patch is to be saved, turn
the VALUE dial to select 512.
5
Touch <Execute>.
When shipped from the
factory, the V-Synth already
contains a collection of
patches. When you save your
own patches, you replace the
factory patches. If you wish to
restore the original patches,
use the Factory Reset operation
(Owner’s Manual; p. 98).
To Next Page
Loading...
Need help?
General
