Samsung 6000 Series User Manual

▶ ◀ ▶
English
❑
Troubleshooting for Anynet+
Problem Possible Solution
Anynet+ does not work.
•
Check if the device is an Anynet+ device. The Anynet+ system
supports Anynet+ devices only.
•
You can connect only one receiver (home theater).
•
Check if the Anynet+ device power cord is properly connected.
•
Check the Anynet+ device’s Video/Audio/HDMI cable connections.
•
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+
setup menu.
•
Check whether the TV remote control is in TV mode.
•
Check whether the remote control is Anynet+ compatible.
•
Anynet+ doesn’t work in certain situations. (Searching channels,
operating Smart Hub or Plug & Play (initial setup), etc.)
•
If you have removed and then reconnected the HDMI cable, please
make sure to search devices again or turn your TV off and on again.
•
Check if the Anynet+ function of the Anynet device is set on.

Samsung 6000 Series Specifications

General

Display Type	LED
Smart TV	Yes
Refresh Rate	60Hz
HDMI Ports	3
USB Ports	2
Wi-Fi	Yes
3D Capability	No
Contrast Ratio	Mega Contrast
Sound Output	20W
Dimensions (Without Stand)	Varies by screen size
Weight (Without Stand)	Varies by screen size
Screen Size	55", 65"
Operating System	Tizen