Basic Recording
✤ The EASY.Q mode works only in Camera mode.
✤ The EASY.Q mode allows a beginner to easily make good recordings.
1. Set the Power switch to CAMERA.
2. Set the Mode switch to TAPE.
3. By pressing the EASY.Q button, all functions on the camera will be set to off and the recording
settings will be set to the following basic modes:
■
The word EASY.Q will appear on the LCD screen at the same time.
■
Battery level, recording mode, counter, date/time, and DIS ( ) will be displayed.
However, the Date/Time will only be seen if it has been previously set. (see page 33)
4. Press the Start/Stop button to start recording.
Recording will begin using the basic automatic settings.
5. Press the EASY.Q button again in the STBY mode and then turn the EASY.Q mode off.
■
The EASY.Q function will not turn off while you are recording.
■
The camera will return to the settings that were set prior to activating EASY.Q mode.
[ Notes ]
■
In EASY.Q mode, certain functions are not available, such as Menu, BLC and Manual focus.
If you want to use these functions, you must first turn the EASY.Q mode off.
■
The EASY.Q mode settings are deleted when the Battery pack is removed from the Camcorder and
must be reset when the Battery pack is replaced.
■
Taking a photo image using the PHOTO button while EASY.Q is set, releases DIS function.
■
Digital Zoom, COLOR NITE or Digital Effect is not available in the EASY.Q mode.
Using EASY.Q Mode (for Beginners)
60min
0:00:10
SP
STBY
4040
ENGLISH
3
1
œ
To Next Page
Loading...
Need help?
General
