setup screen
94_ setup screen
Focus Setup
1. Select <Focus>.
2. Select each item and set it properly.
• Mode
- Manual : The focus will be adjusted
manually according to the zoom
factor.
- Auto : The focus will be adjusted
automatically according to the zoom factor.
- One Shot AF : Auto Focus will be performed once after the zooming operation.
• Digital zoom : Specify the use of digital zoom.
`
Digital zoom cannot be used if DIS is used.
• Digital zoom limit : Specify the limit of the digital zoom.
• Zoom tracking : Specify the focus sync mode with the panning/tilting/zooming
operation.
- Off : Only the zoom lens will work.
- Auto-Track : It will control (detect and correct) the zooming operation to keep
fitting the focus.
- Tracking : The zooming operation will be guided by the focus track.
• Zoom speed : Adjust the zoom tracking speed.
• Init. lens : Reset the lens to prevent the step-out in zoom mode.
• Duration : Specify the frequency of resetting the lens.
`
You can specify the date of resetting the lens that will perform in auto focus mode. Specify the time
between 1 and 7 days, and the resetting will be performed at 24-hour interval starting from the
specified date.
J
`
The auto focus function might not work properly under any of the following conditions:
-
Bright or flashing lights (ex.- neon sign)
-
Low illumination of the target area
-
Slow-shutter action
-
Dark object
-
Excessive illumination of the target area
-
If a short-distance object and a long-distance object are in the target area
-
If there is no contract gap (sky, wall, etc.)
-
If the camera is taking a picture of a thin horizontal line
`
In the auto focus mode, because the camera focuses on the object at the center of the area, other
objects which are not in the center can be out of focus.
To Next Page
Loading...
Need help?
General
