-24-
AIR FILTER CARE AND CLEANING
Air Filter prevents dust from accumulating on surface of Projection Lens and Projection Mirror. Should Air Filter
become clogged with dust particles, it will reduce Cooling Fans' effectiveness and may result in internal heat build up
and adversely affect life of a projector.
Clean Air Filter following steps below:
1
Turn power off, and disconnect AC power cord from AC
outlet.
2
Pull out air filter unit from a projector.
3
Pulling up center frame of air filter top, separate air filter
top and sheet from air filter base.
4
Clean each parts with brush or wash out dust and
particles.
Be sure to dry them out.
5
Assemble sheet and air filter and replace air filter to a
projector.
CAUTION
Do not operate a projector with air filter removed.
Dust may accumulate on LCD panel and Mirror
degrading picture quality.
Do not put small parts into air Intake Vents. It may
result in malfunction of a projector.
The filter be careful and handle. the effect of the
filter runs out in case of a leak and it being broken
off.
AIR FILTER UNIT
AIR FILTER TOP
AIR FILTER BASE
SHEET
Cleaning of the sheet
When Air filter cleaning, it clean the air intake
vents, at the same time.
To Next Page
Loading...
Need help?
General
