97 English
CHECKING THE REMAINING CARD MEMORY AND INTERNAL MEMORY
You can check how many images can be captured and how much recording
time is available on the card or in the camera’s internal memory. For a table
showing the maximum number of images and recording time for specific
cards, please see “Possible No. of Images/Possible Shooting Time” on
page 132.
Checking the remaining number of images and video recording time
1 Set the camera to the desired
shooting mode (see pages 29 and
30).
h The remaining number of images
appears in the upper right of the
LCD monitor (for the still image and
sequential shots shooting modes).
h The remaining video recording time
appears in the upper right of the
LCD monitor (for the video clip
shooting mode).
h The remaining number of images
and video recording time will differ
depending on the resolution and
compression settings.
h When the remaining number of
images or the remaining video
recording time is “0”, it may be
possible to capture a few more
images by changing the shooting
mode, setting a lower resolution
setting (see page 50), or selecting a
different compression setting (see
page 51).
Remaining number of images
<Still image/sequential
shots mode>
* Depending on the card
capacity, hr:min:sec
Remaining time (min:sec)*
<Video clip shooting mode>
To Next Page
Loading...
Need help?
General
