55 English
CHANGING THE SHOOTING SETTINGS
Exposure Correction
When capturing images, you can make the image lighter or darker.
1 Cancel the Shooting Setting Screen
(see page 40).
h Press the MENU button to exit the
Shooting Setting Screen.
2 Press [l] or [m] on the arrow button.
h The exposure correction bar
appears.
h At this point, you can press [l] or
[m] on the arrow button to adjust the
exposure.
HINT
i Exposure correction setting is canceled in the following cases:
When the pointer is set to the center position.
After the shooting mode is changed.
When the playback mode is set.
After the power is turned off.
i The exposure setting numerical value is shown at the left end of the
exposure bar. The exposure can be set to a value from –1.8EV to +1.8EV.
i The accessing indicator flashes when the exposure correction is active.
i You can also correct the exposure by selecting the exposure correction
icon on the Shooting Setting Screen.
NOTE
When shooting without using the LCD monitor...
i Exposure correction is disabled.
Exposure correction bar
Pointer
Exposure
correction
setting
Darker Lighter
To Next Page
Loading...
Need help?
General
