English 30
Set the camera to the video clip shooting mode
1 Set the main switch to [ ], and turn on the camera.
h An image appears on the LCD monitor. If no image appears, please
see page 83 and follow the steps to enable the LCD monitor.
Capturing still images
1 Set the camera to the still image
shooting mode (see page 29).
2 Slowly press and hold the shutter
release button halfway.
h The target mark or the focus
icon (focus-lock) appears in
the LCD monitor.
h If the Shooting Setting Screen
(see page 40), was displayed, it is
exited.
3 Press the shutter release button
all the way.
h The image is captured.
LCD monitor
Shutter release button
(Press halfway)
(Press fully)
Focus icon
Target mark
To Next Page
Loading...
Need help?
General
