103 English
DIRECT-PRINT
Your digital camera supports the PictBridge function. By connecting the digital
camera directly to a PictBridge-enabled printer, the digital camera’s LCD
monitor can be used to select images and initiate printing.
Print preparations
1 Install the card containing the images you want to print in the digital
camera.
h If there is no card installed in the camera, the image data from the
camera’s internal memory will be printed.
2 Use the supplied USB interface cable to connect the camera to the
printer.
NOTE
Do not turn off the power to the printer while it is connected.
i If the power to the printer is turned off while it is connected, the camera
may not operate correctly. If the camera does not operate correctly,
disconnect the dedicated USB interface cable, turn off the camera, and
then reconnect the cable.
To the OUTPUT terminal
To U S B p o r t
Dedicated USB interface cable (supplied)
To Next Page
Loading...
Need help?
General
