DANGER
1. Ensure the power has been cut off before wiring.
Electric chock and fire hazard.
2. Ask electric engineering professionals to conduct wiring.
Electric chock and fire hazard.
3. Earth terminals must be reliable grounded.
(380V class: especially the third grounding)
Electric shock and fire hazard.
4. Check if its action is effective after emergency brake terminal is connected.
Injury risk (wiring responsibility should be beard by users).
5. Do not touch output terminals directly. The output terminal is connected directly to motor. There should be no short
circuit between output terminals.
Electric shock and short circuit hazard.
6. Install the terminal cover before power on, and ensure power off when dismantling the terminal cover.
Electric shock hazard.
7. Conduct check and maintenance after 5~8 minutes after power off when internal residual electricity is discharged
completely.
Hazard of residual voltage in electrolytic capacitor.
To Next Page
Loading...
Need help?
General
