1 General safety notes
■
R
ead the operating instructions before commissioning.
■
Connection, mounting, and configuration may only be performed by trained
s
pecialists.
■
Not a safety component in accordance with the EU Machinery Directive.
■
When commissioning, protect the device from moisture and contamination.
■
T
hese operating instructions contain information required during the life cycle of
the sensor.
EN/IEC 60825-1:2014
IEC60825-1:2007
LASER CLASS 1
Laser
1
Maximum pulse power < 5.95 mW
Puls length: 2 µs
Wavelength: 670 - 690 nm
Complies with FDA performance
standards except for conformance with
IEC 60825-1 Ed. 3,
as described in Laser Notice No. 56,
dated May 8, 2019
ATTENTION
WARNING: Interruption, manipulation or incorrect use can lead to hazardous exposure
due to laser radiation.
2 Notes on UL approval
UL Environmental Rating: Enclosure type 1
3 Intended use
The GL6L is an opto-electronic photoelectric retro-reflective sensor (referred to as “sen‐
sor” in t
he following) for the optical, non-contact detection of objects. A reflector is
required for this product to function. If the product is used for any other purpose or
modified in any way, any warranty claim against SICK AG shall become void.
4 Operating and status indicators
GL6L-xxx1x
GENERAL SAFETY NOTES 1
8025389 / 24.06.2020 | SICK
Subject to change without notice
5
To Next Page
Loading...
Need help?
General
