Siemens HiPath Series User Manual

Step by Step
Making Calls – Basic Functions
16
The called party does not answer or is busy:
Press the key. The LED goes out.
Ending the call
t Replace the handset.
or
Press the key.
Speaker
Your system may also be programmed so that
you have to press the Internal key before you dial
an internal number.
To call an external party, you have to enter an ex-
ternal code before dialing the party’s telephone
number (Prime Line is not active; contact your
service personnel).
Release

Siemens HiPath Series Specifications

General

Brand	Siemens
Model	HiPath Series
Category	Telephone
Language	English