Siemens HiPath Series User Manual

Testing the Telephone
99
Step by Step
Testing the Telephone
Testing the Telephone Functions
You can test your telephone functions.
Precondition: Your telephone is idle.
Press the key. The LED lights up.
Select and confirm.
or
qmhd Enter the code.
If everything is OK,
• all LEDs on the telephone start flashing, including
the ones on the key module (only the Program/Serv-
ice menu LED lights up);
• your station number appears on the screen;
• all pixels in the display are activated;
• the ringer signal sounds.
Checking the Key Assignment
You can check the assignment of keys on your tele-
phone to see which functions are programmed on
which keys.
Press the key. The LED lights up.
Select and confirm.
or
qme Enter the code.
Press the key. The key assignment appears on the
screen.
Select and confirm.
or
Select and confirm.
Program/Service
*
940=Phone test?
Program/Service
*
91=Prog. feature key?
US: Another key?
UK: Program another key?
US: Exit?
UK: End?

Siemens HiPath Series Specifications

General

Brand	Siemens
Model	HiPath Series
Category	Telephone
Language	English