Siemens HiPath Series User Manual

Using Other Functions
77
Step by Step
Change call number (relocate)
You can put your call number on every other available te-
lephone when it is set up (ask your service personnel).
Your previous telephone then receives the old call num-
ber of your new telephone. The call number together
with the settings (e.g. programmed keys) of the tele-
phone are changed.
Precondition: Your old and new telephone are the first
telephones at each connection. The telephone are in
idle state.
The following procedure is carried out on the new tele-
phone.
Press the key. The LED lights up.
Select and confirm.
or
qmhem Enter the code.
o Enter your own call number.
o Enter code (telephone lock) Æ Page 71.
(This is not necessary if you have not determined a code
yet).
Confirm.
or
rmhem Enter the code.
Program/Service
*
9419=Relocate?
Complete Relocate
If you exchange call numbers from different sys-
tem telephones, all programmed keys are re-
placed with the default assignment.
You can, however, connect your telephone to
another connection and carry out the procedure.

Siemens HiPath Series Specifications

General

Brand	Siemens
Model	HiPath Series
Category	Telephone
Language	English