Operating Special Screen Objects
5-19
MP270 Equipment Manual
Release 01/99
5.6.1 Logging in and out of the MP270
Login
After calling a password protected function, the MP270 automatically requests the
entry of a password. It is not necessary to enter the password again to trigger
functions in this or a lower level.
Logout
In order to rule out operation by unauthorized personnel, a password level greater
than 0 should not remain active on the MP270 over too long a period of time. The
following options are available to explicitly reset passwords levels:
Configured logout time expires
If the MP270 is not used within the configured logout time (timeout), it
automatically resets the current password level to 0.
Logout from MP270
If the configuration links the function
Logoff_user
with an operating element, the
element can be used to reset the current password level to 0 on the MP270.
To Next Page
Loading...
Need help?
General
