Siemens RDS110 User Manual

Mounting and installation
3
A6V10877569_en--_e 11 | 59
3 Mounting and installation
NOTICE
We recommend hiring licensed installers to mount and install the thermostat.
● The thermostat is suitable for wall mounting.
● The recommended height is 1.50 m above the floor.
● Do not mount the thermostat in recesses, shelves, behind curtains or doors, or
above or near heat sources.
● Avoid direct solar radiation and drafts.
● Seal the conduit box or the installation tube if any, as air currents can affect
sensor readings.
● Adhere to allowed ambient conditions.
1. Switch off power to your heating system by using either your home’s breaker
box or the system’s power switch.
2. Remove the cover of your old thermostat.
3. Label the wires according to your old thermostat terminal designations, using
the stickers provided together with the thermostat. It is also helpful if you take a
picture of the current wire connections for reference later on.
Mounting
Installing your
thermostat

Siemens RDS110 Specifications

General

Interface	WLAN
Control type	Sensor
Product color	Black
Memory function	-
Housing material	Acrylic glass
Smart thermostat	Yes
Quantity	1

Weight and Dimensions

Depth	26 mm
Width	91 mm