Operation
9.3 Device with touch panel
SIMATIC HMI IPC677C
106 Operating Instructions, 04/2013, A5E02722710-04
NOTICE
Only touch one point on the touch panel and not several points at one time. You may
otherwise trigger unintended reactions.
Do not touch the screen in the following situations:
- During the booting process
- When plugging or unplugging USB components
- While Scandisk is running
NOTICE
Damage to device from incorrect operation
Operate the touch panel with a finger or an approved pen.
Never use hard or pointed objects.
Touch pen
A touch pen is available as an accessory.
0[
Figure 9-8 Touch pen
Dimensions
Length 155 mm
Maximum diameter 20 mm
NOTICE
Damage to the keys
The touch pen is not appropriate for operating the keys.
To Next Page
Loading...
Need help?
General
