Siemens SIMATIC HMI IPC677C User Manual

Detailed descriptions
16.4 BIOS-Setup
SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04
239
16.4.9 Boot Menu
In this menu this booting behavior of the device is specified and the boot medium or
sequence of the boot media is determined.
Figure 16-15 Boot Menu
Entry Meaning
Quick Boot Enable or disable
If enabled, the programming device starts faster because various hardware
function tests are skipped.
Quiet Boot Booting is carried out in text mode.
POST errors Specification of the booting behavior if errors are recognized.
• Never halt on errors: Continue the booting process when errors occur.
• Halt on all errors: Interrupt the booting process when errors occur.
• All without keyboard: Interrupt the booting process when errors occur,
except for keyboard errors.
• All without kb/smart: Interrupt the booting process when errors occur,
except for keyboard and S.M.A.R.T errors. (SMART: Self-Monitoring,
Analysis and Reporting Technology)
Numlock On = Enable numeric keypad on right
Off = Disable numeric keypad on right (= navigation)
USB Boot Allow/Do not allow booting of inserted USB devices.
PXE Boot to LAN 1 Enable or disable booting of the LAN1.
PXE Boot to LAN 2 Enable or disable booting of the LAN2.
EFI> Set order of the EFI boot media
Legacy> Set traditional boot order (Normal, Advanced, Advanced Placeholder).

Siemens SIMATIC HMI IPC677C Specifications

General

Brand	Siemens
Model	SIMATIC HMI IPC677C
Category	Industrial PC
Language	English