Siemens SIMATIC HMI IPC677C User Manual

Detailed descriptions
16.4 BIOS-Setup
SIMATIC HMI IPC677C
244 Operating Instructions, 04/2013, A5E02722710-04
16.4.12 BIOS Setup default settings
Documenting your device configuration
If you have changed any default settings in Setup, you can enter them in the following table.
You can then refer to these entries for any future hardware modifications.
Note
Print out the table below and keep the pages in a safe place once you made your entries.
Note
The default setup settings vary depending on the ordered device configuration.
If you have changed any default settings in Setup, you can enter them in the following table.
You can then refer to these entries for any future hardware modifications.
BIOS Setup default settings
System parameters Default settings Local settings
Main
System Time hh:mm:ss
System Date MM/DD/YYYY
System parameters Default settings Local settings
Advanced>Peripheral
Configuration
Internal COM 1 Auto
Onboard Ethernet 1 Enabled
Onboard Ethernet 2 Enabled
PCI – MPI / DP Enabled

Siemens SIMATIC HMI IPC677C Specifications

General

Brand	Siemens
Model	SIMATIC HMI IPC677C
Category	Industrial PC
Language	English