Siemens SIMATIC HMI IPC677C User Manual

Detailed descriptions
16.6 Communications processor CP 1616 onboard
SIMATIC HMI IPC677C
252 Operating Instructions, 04/2013, A5E02722710-04
16.6 Communications processor CP 1616 onboard
16.6.1 Introduction
16.6.1.1 Properties
The CP 1616 onboard allows the connection of industrial PCs to Industrial Ethernet.
The basic characteristics of the PCS 1616 onboard are:
● Optimized for PROFINET IO
● Enhanced Real Time Ethernet Controller 400 = ERTEC 400
● Three RJ45 sockets for connecting terminal devices or addition network components
● Integrated 3-port real-time switch
● Automatic hardware detection
16.6.1.2 Network connections
Ethernet
The CP 1616 is designed for operation in Ethernet networks. Additional features are:
● The connectors are designed for 10BaseT and 100BaseTX.
● Data transfer rates of 10 and 100 Mbps in full/half duplex mode are supported.
● The handshake is performed automatically (auto negotiation).
● A 3-port realtime switch is located in the module.
● Autocrossing
Three RJ45 connectors
The CP 1616 is connected to the LAN (Local Area Network) via one of the three RJ45
sockets of the PC.
These three sockets lead to the integrated realtime switch.

Siemens SIMATIC HMI IPC677C Specifications

General

Brand	Siemens
Model	SIMATIC HMI IPC677C
Category	Industrial PC
Language	English