Siemens SIMATIC HMI IPC677C User Manual

Preface
SIMATIC HMI IPC677C
4 Operating Instructions, 04/2013, A5E02722710-04
Conventions
Representation Validity
"File"
• Terminology that appears in the user interface, for example
menu commands, tabs, buttons
• Required input, for example limit values, tag values
• Path information
"File > Edit" Operational sequences, for example, menu commands, shortcut
menu commands
<F1>, <Shift>+<F1> Keys and key combinations
The "IPC677C", "control unit" and "computer unit" are uniformly referred to as "device" in
these operating instructions. The full term is only used when a concrete reference is
necessary.
Furthermore, the "CP 1616 onboard" is referred to as "CP".
Note
A note is important information about the product, handling the product or a reference to
specific sections of the documentation that require special consideration.
Trademarks
All names labeled with ® symbol are registered trademarks of Siemens AG. Other names
used in this documentation may be trademarks, the use of which by third parties for their
own purposes could violate the rights of the owner.
HMI
®
SIMATIC
®
SIMATIC HMI
®
SIMATIC WinCC
®
SIMATIC WinCC flexible
®
Panel PC 677B
®
IPC677C
®

Siemens SIMATIC HMI IPC677C Specifications

General

Brand	Siemens
Model	SIMATIC HMI IPC677C
Category	Industrial PC
Language	English