Machine data
2.2 General machine data
Parameter Manual
72
Operating Instructions, 08/2013, 6FC5397-8EP40-0BA0
Description:
This machine data defines the ASUB priority from which MD11602
$MN_ASUP_START_MASK is to be applied. MD11602 $MN_ASUP_START_MASK is applied
from the level specified here up to the highest ASUB priority level 1.
Related to:
MD11602 $MN_ASUP_START_MASK
Description: This MD determines whether user-specific routine: _N_ASUP_SPF stored in
directory _N_CUS_DIR/ _N_CMA_DIR is to be used to process RET and REPOS. The
user ASUB is searched for first in _N_CUS_DIR.
Value: Meaning:
0 Routine _N_ASUP_SPF is not activated for either RET or REPOS.
Bit0 = 1User-specific routine _N_ASUP_SPF is executed for RET, the routine
supplied by the system is executed for REPOS.
Bit1 = 1User-specific routine _N_ASUP_SPF is executed for REPOS, the routine
supplied by the system is executed for RET
Bit0= + bit1 = 3User-specific routine _N_ASUP_SPF is executed for both RET
and REPOS
Bit2 = 1User ASUB _N_ASUP_SPF is searched for first in _N_CMA_DIR
Related to:
MD11612 $MN_ASUP_EDIT_PROTECTION_LEVEL
References:
/IAD/ "Installation and Setup Guide"
Description: Protection level of the user-specific ASUB program for RET and/or REPOS
The data is active only if MD11610 $MN_ASUP_EDITABLE is set to a value other
than 0.
This machine data defines the protection level of the program _N_ASU_CUS.
MD irrelevant for:
MD11610 $MN_ASUP_EDITABLE set to 0
Related to:
MD11610 $MN_ASUP_EDITABLE
11604 ASUP_START_PRIO_LEVEL N01, - K1,TE3,TE7
- Priorities from which 'ASUP_START_MASK' is effective DWORD PowerOn
-
- - 7 0 128 2/2
11610 ASUP_EDITABLE N01 K1
- Activation of a user-specific ASUB program DWORD PowerOn
-
-- 0 0 0x7 2/2
11612 ASUP_EDIT_PROTECTION_LEVEL N01 K1
- Protection level of the user-specific ASUB program DWORD PowerOn
-
-- 2 0 7 2/2
To Next Page
Loading...
Need help?
General
