A.5 Default Settings
543
7UT613/63x Manual
C53000-G1176-C160-2
A.5 Default Settings
When the device leaves the factory, a large number of LED indicators, binary inputs
and outputs as well as function keys are already preset. They are summarized in the
following tables.
A.5.1 LEDs
Table A-1 LED Indication Presettings
A.5.2 Binary Input
Table A-2 Binary input presettings for all devices and ordering variants
A.5.3 Binary Output
Table A-3 Output relay presettings for all devices and ordering variants
LEDs Allocated Func-
tion
Function No. Description
LED1 Relay TRIP 511 Relay GENERAL TRIP command
LED2 Relay PICKUP 501 Relay PICKUP
LED3 >Buchh. Trip 392 >Tripp. stage from Buchholz protec-
tion
LED4 no default setting - -
LED5 no default setting - -
LED6 no default setting - -
LED7 no default setting - -
LED8 no default setting - -
LED9 no default setting - -
LED10 no default setting - -
LED11 no default setting - -
LED12 no default setting - -
LED13 Error Sum Alarm 140 Error with a summary alarm
Alarm Sum Event 160 Alarm Summary Event
LED14 FaultConfig/Set 311 Fault in configuration / setting
Binary Input Allocated Func-
tion
Function No. Description
BI1 >Reset LED 5 >Reset LED
BI2 >Buchh. Trip 392 >Tripp. stage from Buchholz protec-
tion
Binary Output Allocated Func-
tion
Function No. Description
BO1 Relay TRIP 511 Relay GENERAL TRIP command
BO2 Relay PICKUP 501 Relay PICKUP
BO3 >Buchh. Trip 392 >Tripp. stage from Buchholz protec-
tion
BO4 Error Sum Alarm 140 Error with a summary alarm
Alarm Sum Event 160 Alarm Summary Event
To Next Page
Loading...
Need help?
General
