5 MENU SYSTEM
This section details the operation of the menu system for the SDM630.
The SDM630 has a menu system that is configurable by the FPP. The FPP has a pool of
menu entries that can be applied as required in the order required. In simple
configurations, no menu can be programmed, if required. See Figure 4 for example
menu.
Pressing the ‘F1’ key from the top-level channel screen enters the menu system. By
default this key has a soft menu label alongside it titled ‘MENU’. When in the menu
system, the soft key ‘F4’ is generally the Back ‘B’ key.
The possible menus are:
· Zone (usually the first menu as it is often accessed). l Key Beeps.
l Channel.
l Alert
Volume.
l Mute Adjust (FM)/Monitor (DMR).
l Speaker
Volume.
l Contacts. l Radio Info.
l Contact Edit. l RSSI.
l User Options. l Call Log.
l Setup. l Messages.
l Backlight.
l Missed
Calls
l Brightness. l GPS
l Contrast. l Scan
l Call Divert l Help.
l Talkgroups. l Test Mode
The presence and order of the above menu selections is determined by the FPP
configuration.
The Setup menu is a special case entry. Setup is a subgroup that can have any of the
list of menu selections assigned to it. This means that, if required, the lesser used
selections can be partly hidden away under the Setup subgroup but still remain
accessible.
The order and presence of the Setup subgroup selections is determined by the FPP.
For instance Info, RSSI and Contrast could be placed under Setup.
The User Options menu group is also a menu subgroup. This subgroup usually
contains on/off functions, such as Key Beeps or Backlight.
Doc Number: TNM--U-E-0108 ISSUE 1.5 Page 36
To Next Page
Loading...
Need help?
General
