Simoco SDM630 User Manual

7.8. MENU
The Menu function key is used for accessing the menu system.
7.9. ZONE, CHANNEL, CONTACT AND MUTE
These are specific functions that provide direct access to the ‘Channel’, ‘Zone’,
‘Contact’ and ‘Mute Adjust’ menus.
7.10. RESET
The Reset function is usually assigned to the F6 key, and is used as a cancel function
when in a menu or as a backspace when entering keypad dial-strings.
7.11. SPEAKER MUTE
The speaker mute function key will mute the audio output to the speaker. Pressing the
function button again will again allow audio to be heard at the speaker.
7.12. DIGITAL OUTPUT
This function provides a general purpose output port for muting entertainment
systems. The defined key allows this function to be enabled or cancelled when
activated by another function (i.e. incoming call).
7.13. UNDEFINED
No function is assigned to the relevant key.
Doc Number: TNM--U-E-0108 ISSUE 1.5 Page 60

Simoco SDM630 Specifications

General

Brand	Simoco
Model	SDM630
Category	Radio
Language	English

Summary

Personal Safety Precautions

Safety Precautions

Emphasizes acquainting oneself with risk assessments and control measures before use.

General Precautions

Lists general operating precautions like not using phone while driving, or in explosive atmospheres.

Hazardous Substances

Advises users to be conversant with safety precautions for hazardous materials.

Warnings and RF Exposure Compliance

Radio Frequency Radiation Warnings

Warns about RF radiation hazards and precautions to avoid injury.

RF Energy Exposure Awareness and Control Information

Instructions to ensure compliance with FCC RF exposure guidelines for occupational use.

Federal Communications Commission Regulations

Explains FCC rules for marketing mobile two-way radios and user awareness.

Compliance with RF Exposure Standards

Lists national and international standards the radio complies with for RF exposure.

RF Exposure Compliance and Control Guidelines

Outlines procedures for controlling exposure to meet occupational limits.

RF Exposure Compliance and Control Instructions

Details specific instructions for controlling RF exposure.

Vehicle Installation Instructions

Provides guidance on installing antennas for optimal separation distances.

Mobile Antenna Installation

Details installation considerations for mobile radio antennas.

Approved Accessories

Lists Simoco approved accessories and their importance for FCC compliance.

Simoco Support Information

UK Customer Services

Lists email, telephone numbers, and fax for UK customer support.

Technical Support

Explains the use of a support ticket system for streamlined customer support.

Technical Support Email Addresses

Lists specific email addresses for technical support in EMEA, Australasia, and Americas.

Technical Support Helplines

Lists telephone numbers for technical support in the UK, US, and Australia.

Controls of the SDM630

Control Functions

Explains the function of each key and indicator on the SDM630 control head.

Basic Operations

4.1 Turning the Radio On and Off

Details the procedure for powering the radio on and off using the volume knob.

4.2 Adjusting the Volume

Explains how to increase or decrease the radio's audio volume.

4.3 Selecting a Zone

Describes how to change between defined zones of radio channels.

4.4 Selecting a Channel

Details how to select a specific channel from the radio's channel database.

4.5 Making a Call

Outlines the process of making a call, including PTT usage and transmission etiquette.

4.6 Receiving a Call

Explains how the radio indicates incoming calls and the speaker icon.

4.8 Emergency Alarm

Covers receiving and making emergency calls and configurable emergency modes.

4.8.1 Receiving Emergency Calls

Describes how the radio indicates an incoming emergency call.

4.8.2 Making an Emergency Call

Explains how to activate the emergency mode by pressing the emergency key.

4.9 Scan Functions

Explains how the Scan Function works for searching channels.

Troubleshooting