4. On the Enter Target screen, use the keypad to enter the required radio ID that
the calls/data are to be diverted to. Press the ‘S’ key to complete the diversion.
5. If the Contact option is selected the Call Divert – Contact list screen will be
displayed.
Figure 36: Call Divert – Contact list screen.
6. On the Call Divert – Contact List screen, use the ▼ and ▲ keys to select the
radio entity that the calls/data are to be diverted to. Press the ‘S’ key to
complete the diversion.
6.18.2. To Cancel a Diversion
If a diversion has been setup, the Call Divert screen displays details of the diversion on
the top part of the screen (see Figure 37 below). The options in lower part of the
screen change to provide the relevant ‘Un-Dvt’ un-divert options.
Figure 37: Call Divert screen showing diversion in place.
To cancel a diversion, use the ▼ and ▲ keys to select the relevant un-divert option.
Press the ‘S’ key to complete the un-divert procedure.
6.19. GPS
The SDM600 Series Mobile Radio transceiver can be fitted with a GPS Option Board kit.
If required, this GPS receiver can then be activated to provide unit location data to
another radio system entity.
The GPS menu option allows the user to enable or disable this GPS position reporting
system.
Doc Number: TNM--U-E-0108 ISSUE 1.5 Page 55
To Next Page
Loading...
Need help?
General
