2
1. Start/stop button
3. Reverse button
4. Auto-lock button
5. Needle up/down position button
Press this button to start or stop the machine.
Hold down this button to sew stitches in reverse or sew reinforcement stitches at a low speed.
Hold down this button to sew locking stitches immediately or at the end of the current patterns
and automatically stop.
Press this button to move the needle to either up or down position. Needle will be programmed
to stop in selected position until button is pressed again.
2. Thread cutter button
Press this button after finishing sewing and the machine will trim the threads.
A. Operation buttons (see page 24/25/26)
6. Mode selection button
7. Stitch width adjustment buttons
Press this button to select direct mode, utility and decorative pattern mode, block letter mode,
script letter mode and outline letter mode.
Press this button to adjust the width of the zigzag stitch.
B. Function buttons (see page 27/28/29)
MACHINE CONTROL BUTTONS
2
3
4
16
1
5
6
12
1
23
4
7
5
8
6
9
0
7
13
12
8
9
11
10
15
6
14
To Next Page
Loading...
