WARNING FUNCTIONS
- When operating correctly: 1 beep
- When the memory is full 20 units of pattern: 3-short beeps
- When operating incorrectly: 3-short beeps
- When the sewing machine is in trouble and can't sew: 8 seconds short beeps
It means that the thread is twisted or jammed and the hand wheel axle can't move. Please refer
to the "Trouble shooting guide" on pages 75 & 76 for solutions. After the problem has been
solved, the machine will continue to sew.
Warning beeping sound
Please Note: If the problem is not resolved, please contact SINGER at www.singer.com.
Attention:
In order to restart the
sewing machine, you will have to turn the on/off switch to the OFF position and then ON
again.
If the thread gets jammed inside the hook during sewing, stopping the needle
from moving, the security switch will stop the machine completely.
Return bobbin winder shaft to left
If the bobbin winder shaft is positioned to the
right (engaged) and any button is pressed a 3-
beep warning will be sounded. Move bobbin
winder shaft to the left (disengaged) to allow
the buttons to be operational.
71
To Next Page
Loading...
Need help?
General
