Note
■
The warning light in the button lights after activation, even if not all of
the conditions for the function of the cooling system have been met. By light-
ing up of the indicator light in the button, the operational readiness of the
cooling system is signalled.
■
During operation of the air conditioning, an increase in engine idle speed may
occur under certain circumstances in order to ensure sufficient heating com-
fort.
Climatronic (automatic air conditioning)
Fig. 117 Controls the Climatronic
Read and observe and on page 106 first.
The Climatronic in automatic mode ensures the best-possible setting of the
temperature of the out-flowing air, the blower stage and air distribution.
The system also takes sunlight into account, which eliminates the need to al-
ter the settings manually.
Individual functions can be set off or on by turning the knob or pressing the
respective button. When the function is switched on the warning light illumi-
nates in the button.
Functions of the individual controls » Fig. 117
Adjust the temperature for the left side or for both sides
›
Lower temperature
›
Increase temperature
Interior temperature sensor
A
B
Depending on equipment fitted:
›
Switching the windscreen heater on/off » page 72
›
Switching on/off aux. heating (standard heating) on/off » page 112
Adjust the temperature for the right side
›
Lower temperature
›
Increase temperature
Control the seat heater on the front left seat » page 80
Control the seat heater on the front right seat » page 80
Adjust the blower speed
›
+ Increase speed
›
- Reduce speed
Switch the intensive windscreen heater on/off
Air flow to the windows
Air flow to the upper body
Air flow in the footwell
Automatic recirculation, switch on or off » page 108
Switching the rear window heater on/off » page 72
Switching automatic mode on
Switching Climatronic system off »
Switching the cooling system on/off
Switch the temperature setting in Dual mode on/off
After the cooling system is switched off, only the ventilation function remains
active whereby the minimum temperature that can be reached is the outside
temperature.
Setting temperature
The interior temperature for the left and right side can be set separately or to-
gether.
The temperature for both sides, is set by turning the knob
A
» Fig. 117 (the
indicator light in the button
is not illuminated).
The temperature for the right side is adjusted by turning the knob
D
(the in-
dicator light in the button
is lit).
The temperature for the left side is adjusted by turning the knob
A
(the indi-
cator light in the button
is lit).
The interior temperature can be set between +18 °C and +26 ℃. The interior
temperature is regulated automatically within this range.
C
D
110
Using the system
To Next Page
Loading...
Need help?
General
