C
HAPTER
7
| Wireless Configuration
Station List
– 90 –
WPS Config — Configures WPS settings for the Wireless Broadband
Router.
◆ WPS Mode — Selects between methods of broadcasting the WPS
beacon to network clients wanting to join the network:
■
PIN: The Wireless Broadband Router, along with other WPS
devices, such as notebook PCs, cameras, or phones, all come with
their own eight-digit PIN code. When one device, the WPS enrollee,
sends a PIN code to the Wireless Broadband Router, it becomes the
WPS registrar. After configuring PIN-Code information you must
press “Apply” to send the beacon, after which you have up to two
minutes to activate WPS on devices that need to join the network.
■
PBC: This has the same effect as pressing the physical WPS button
that is located on the front of the Wireless Broadband Router. After
checking this option and clicking “Apply” you have up to two
minutes to activate WPS on devices that need to join the network.
STATION LIST
Displays the station information which associated to this Wireless
Broadband Router.
Figure 46: Station List
To Next Page
Loading...
Need help?
General
