C
HAPTER
9
| Administration Settings
System Management
– 100 –
SYSTEM MANAGEMENT
The System Management commands allow you to change the language
settings displayed in the interface, and change the user name and
password.
Figure 52: System Management
LANGUAGE SETTINGS You can change the language displayed in web interface. Chooses the
appropriate language of your choice from the drop-down list, then click
“Apply”. (Options: English, Traditional Chinese. Default: English)
WEB INTERFACE
SETTINGS
To protect access to the management interface, you need to configure a
new Administrator’s user name and password as soon as possible. If a new
user name and password are not configured, then anyone having access to
the Wireless Broadband Router may be able to compromise the unit's
security by entering the default values.
◆ User Name — The name of the user. The default name for access to
the unit is “admin”. (Length: 3-16 characters, case sensitive)
◆ Password — The password for management access. The default
password preset for access to the unit is “smcadmin” (Length: 3-16
characters, case sensitive)
◆ Confirm Password — Prompts you to enter the password again for
verification.
To Next Page
Loading...
Need help?
General
