SMC Networks D3CM1604 User Manual

Preconfiguration Guidelines
28
D3CM1604 DOCSIS 3.0 Cable Modem Administrator Manual
Figure 3-4. Properties Window
5. Click the OK button to save your changes and close the dialog box.
6. Click the OK button again to save your changes.
Configuring Microsoft Windows Vista
Use the following procedure to configure a computer running Microsoft Windows Vista with
the default interface.
1. On the Windows taskbar, click Start, click Control Panel, and then select Network and
Internet Icon.
2. Click View Networks Status and tasks and then click Management Networks
Connections.
3. Right-click the Local Area Connection icon and click Properties.
4. Click Continue. The Local Area Connection Properties dialog box appears.
5. In the Local Area Connection Properties dialog box, verify that Internet Protocol
(TCP/IPv4) is checked. Then select Internet Protocol (TCP/IPv4) and click the

SMC Networks D3CM1604 Specifications

General

Brand	SMC Networks
Model	D3CM1604
Category	Modem
Language	English