SMC Networks D3CM1604 User Manual

Configuring the Cable Modem
37
D3CM1604 DOCSIS 3.0 Cable Modem Administrator Manual
Understanding the Web Management Interface
The top and left sides of the Web management interface contain a Status menu and
submenus for selecting pages to configure the cable modem. When you click the Status
menu at the top, a set of submenus appears at the left side. The configuration settings
associated with the currently selected submenu appear in the workspace (see Figure 4-1).
Figure 4-1. Main Areas on the Web Management Interface
Web Management Interface Menus
Table 4-1 describes the menus in the Web management interface.
Table 4-1. Web Management Interface Menus and Submenus
Menus and Submenus
Description
See Page
Status > About
Shows information about the current system software.
38
Status > Connection
Shows the status of the cable modem's hybrid fibre-coaxial (HFC) and
Internet Protocol (IP) network connectivity.
39
Status > Security
Configures administration access privileges and the ability to restore
factory defaults to the system.
41
Status > Event Log
Displays the contents of the Simple Network Management Protocol
(SNMP) event log.
42
Logout
Ends your session and logs you off the web management interface. A
precautionary message does not appear when you click Logout, so be
sure you want to end your current session before clicking Logout.

Submenus
Workspace
Menus

SMC Networks D3CM1604 Specifications

General

Brand	SMC Networks
Model	D3CM1604
Category	Modem
Language	English