Troubleshooting Procedures
54
D3CM1604 DOCSIS 3.0 Cable Modem Administrator Manual
5. When you finish, type exit at the command prompt and press Enter to close the window.
Using Ping on a Macintosh
To ping on a Macintosh:
1. Click on Go > Applications > Utilities.
2. Click on Network Utility, and then click the Ping tab. A page similar to the one in Figure
5-3 appears.
3. In the first field, enter the IP address you want to ping.
4. Using the options below the field, select an unlimited number of pings or send a specific
number of pings.
5. Click the Ping button. If you receive:
reply from..., the destination IP address was contacted successfully.
request timed out, the destination IP address was not contacted successfully.
destination host unreachable, you are not on the same subnet as the destination
address. Change your IP address to communicate with the destination address.
Figure 5-3. Ping Tab on the Network Utility Page