SMC Networks D3CM1604 User Manual

Configuring the Cable Modem
39
D3CM1604 DOCSIS 3.0 Cable Modem Administrator Manual
Viewing Network Connectivity
Path: Status > Connection
The Connection page shows information about the status of the cable modem's HFC and IP
network connectivity. This is the same information shown on the Login screen on page 35.
The information on this page is organized into the following sections:
Section
Description
Startup Procedure
Shows the procedures performed by the cable modem at startup, their status, and any comment associated
with the procedures.
Downstream Bonded
Channels
Shows the channel, lock status, modulation, channel ID, frequency, power, signal-to-noise ratio (SNR), and
total correctables and uncorrectables.
Upstream Bonded
Channels
Shows the channel, lock status, upstream (US) channel type, channel ID, symbol rate, frequency, and power.
CM IP Address
Shows the cable modem IP address, its duration and the date and time when it expires.
Frequency Select
(DS1)
Lets you enter the frequency, in MHz, to be used for communications over downstream channel 1 (DS1).
Click TUNE to apply your setting.
Current System Time
Shows the current date and time.

SMC Networks D3CM1604 Specifications

General

Brand	SMC Networks
Model	D3CM1604
Category	Modem
Language	English