SMC Networks JXCP1 User Manual

- 8 -
位置 速度
100 500
200
1000
50
200
1
2
3
ﾃｽﾄ
ﾃｽﾄ
ﾃｽﾄ
現在位 置
120.3
現在速 度
200
mm
mm/ s
動作中
アラー ム
モニタ
設定
位置 速度
100 500
200
1000
50
200
1
2
3
ﾃｽﾄ
ﾃｽﾄ
ﾃｽﾄ
現在位 置
120.3
現在速 度
200
mm
mm/ s
動作中
アラー ム
モニタ
設定
•Power supply plug (Included)
Part No.: JXC-CPW
<Applicable wire size>
AWG20 (0.5mm
2
)
PLC
Controller power
supply
24VDC
•Controller set up kit
(Controller setting software,
communication cable,
conversion unit, USB cable
are included)
Part No: JXC-W2
•Communication cable
PC
•Conversion
unit
•USB cable
(A-miniB type)
•Conversion cable
Product no.: P5062-5
2.3 Product configuration
An example of the controller structure is shown below.
1. These items are included when ordered using the part number for an actuator set.

2. Latest version of the controller setting software must be used.
Software can be downloaded from SMC website. http://www.smcworld.com/
Warning
Refer to 5. External Connections (P.21) for wiring.
Refer to 16. Precautions for wiring and cable (P.69) when handling the wiring and cables.
The Communication cable must be connected to a PC using a USB cable through a conversion unit.
Do not connect the teaching box to a PC, as this may cause damage to the personal computer.
1
Electric actuator
To MOT
To ENC
•Actuator cable
(Robotic type cable)
Model number:
•LE-CP-□-□
(Robotic type cable)
•LE-CP-□-□-S
(Standard cable)
1
PROFINET
•Teaching box
(3m cable is provided.)
Part No: LEC-T1-3□G□
(Option)
To SI
or
2
To PWR
●Controller
To P1, P2

SMC Networks JXCP1 Specifications

General

Brand	SMC Networks
Model	JXCP1
Category	Controller
Language	English