Using the shooting function
103
• In viewfinder mode, if the shutter button is pressed halfway down and
released, “br 1” appears. “Fbr 1” appears for the flash bracket. When
flash bracket shooting starts, it indicates what number the next frame is,
for instance, “Fbr 2,” “Fbr 3.”
You can shoot using the SHUTTER and 2SEC (the shutter is released after
2 seconds) buttons on the RMT-DSLR1 Wireless Remote Commander
(sold separately). Also, refer to the operating instructions supplied with the
Wireless Remote Commander.
Note
• When you shoot images using the viewfinder, use the eyepiece cover (page 28).
Shooting with the Remote Commander
1 on the control button t
(Remote Commander)
2 Focus on the subject, point the transmitter of the Remote
Commander to the remote sensor, and shoot the image.
To Next Page
Loading...
Need help?
General
