164
Warning messages
If the following messages appear,
follow the instructions below.
Incompatible battery. Use correct
model.
• An incompatible battery pack is
being used (page 18).
Set date and time?
• Set the date and time. If you
have not used the camera for a
long time, charge the internal
rechargeable battery (pages 25,
167).
Power insufficient
• You tried to perform [Cleaning
mode] when the battery level is
insufficient. Charge the battery
pack or use the AC Adaptor
(sold separately).
Unable to use “Memory Stick.”
Format?
Unable to use SD memory card.
Format?
•
The memory card was formatted
on a computer and the file format
was modified.
Select [OK], then format the
memory card. You can use the
memory card again, however, all
previous data in the memory card
is erased. It may take a some time
to complete the format.
If the message still appears,
change the memory card.
Card error
• An incompatible memory card is
inserted or the format has failed.
Reinsert “Memory Stick.”
Reinsert SD memory card.
• The inserted memory card
cannot be used in your camera.
• The memory card is damaged.
• The terminal section of the
memory card is dirty.
This “Memory Stick” is not
supported.
• Use “Memory Stick” media
available on this camera
(page 23).
No “Memory Stick” inserted.
Shutter is locked.
No SD memory card inserted.
Shutter is locked.
• No memory card of the type
selected using the memory card
switch is inserted. Insert a
memory card, or change the type
of the memory card using the
memory card switch.
Processing...
• When Long exposure noise
reduction will be done for the
same amount of time that the
shutter was open. You cannot do
any further shooting during this
reduction.
To Next Page
Loading...
Need help?
General
