20
Attaching a lens
Notes
• A rear lens cap is not supplied with the DT 18-55mm F3.5-5.6 SAM Lens Kit. When
you store the lens without attaching it to the camera, purchase the Rear Lens Cap
ALC-R55.
• When attaching a lens, do not press the lens release button.
• Do not use force when attaching a lens.
1 Remove the body cap from the
camera and the packaging lid
from the rear of the lens.
• When changing the lens, quickly
change the lens away from dusty
locations so as to keep dust or debris
from getting inside the camera.
Packaging lid
2 Mount the lens by aligning the
orange index marks on the lens
and camera.
Orange index marks
3 Turn the lens clockwise until it
clicks into the locked position.
Body cap
To Next Page
Loading...
Need help?
General
