Sony Cyber-shot DSC-F828 User Manual

24
To remove the Microdrive/CF card
Open the CF card cover, then push the CF
card eject lever so that the Microdrive/CF
card is ejected.
• Note that the Microdrive may be heated right
after using the camera.
• Whenever the access lamp is lit, the
camera is recording or reading out an
image. Never remove the Microdrive/CF
card or turn off the power at this time.
The data may be corrupted or the
Microdrive/CF card may become
unusable.
CF card eject
lever
Access lamp
Setting the still image size
, Set the mode dial to and
turn on the power, then press
MENU.
The menu appears.
• You can carry out this operation even when the
mode dial is set to P, S, A, M, SCN.
1
8M
3:2
5M
3M
1M
Image Size
8M
Mode
MENU
, Select (Image Size) by
moving the multi-selector to b/
B, then select the desired
image size by moving the
multi-selector to v/V.
The image size is set.
After the setting is completed, press
MENU. The menu disappears from the
screen.
• For more information about the image size, see
page 25.
• This setting is maintained even when the power
is turned off.
2
8M
3:2
5M
3M
1M
Image Size
8M
Mode
8M
3:2
5M
3M
1M
Image Size
5M
Mode

Sony Cyber-shot DSC-F828 Specifications

General

Sensor Type	CCD
Sensor Size	2/3 inch
Resolution	8.0 Megapixels
Image Processor	Real Imaging Processor
Lens Type	Carl Zeiss Vario-Sonnar T*
Optical Zoom	7x
Digital Zoom	2x
Aperture	f/2.0-2.8
Shutter Speed	30 - 1/3200 sec
LCD Screen Size	1.8 inch
LCD Screen Resolution	134, 000 pixels
Viewfinder	Electronic
Focal Length	7.1-51mm
ISO Sensitivity	64, 100, 200, 400, 800
Storage Media	CompactFlash Type I/II, Memory Stick
Battery Type	NP-FM50 InfoLithium
Dimensions	134 x 91 x 156 mm
Weight	906 g (including battery and memory card)