Sony Cyber-shot DSC-F828 User Manual

71
Advanced still image shooting
c Select [ ] (Flash Level) with
b/B, then select the desired
setting with v/V.
High: Makes the flash level higher
than normal.
Normal: Normal setting.
Low: Makes the flash level lower than
normal.
Using an external
flash
Mode dial: /P/S/A/M/SCN
You can mount an optional external flash.
Using an external flash increases the
amount of light and that will allow you to
shoot more vivid flash pictures than when
using the internal flash.
For details, refer to the operating
instructions supplied with your flash.
• When an external flash is mounted, the weight
prevents the lens portion from becoming steady.
We recommend supporting the lens portion
with your left hand or using a tripod for
recording.
• You cannot have an external flash and the built-
in flash strobe at the same time.
• If you use two or more external flashes at the
same time, note that the camera may not be able
to function properly, or that may cause a
malfunction.
• When the proper white balance is not set using
an external flash, set the flash mode to
(Forced flash) or (Slow synchro), then set
the white balance using the
(one-push
SET) (page 73).
Mode dial
Multi-selector
(v/V/b/B)
Shutter button
Advanced
accessory
shoe
ACC (accessory)
jack

Sony Cyber-shot DSC-F828 Specifications

General

Sensor Type	CCD
Sensor Size	2/3 inch
Resolution	8.0 Megapixels
Image Processor	Real Imaging Processor
Lens Type	Carl Zeiss Vario-Sonnar T*
Optical Zoom	7x
Digital Zoom	2x
Aperture	f/2.0-2.8
Shutter Speed	30 - 1/3200 sec
LCD Screen Size	1.8 inch
LCD Screen Resolution	134, 000 pixels
Viewfinder	Electronic
Focal Length	7.1-51mm
ISO Sensitivity	64, 100, 200, 400, 800
Storage Media	CompactFlash Type I/II, Memory Stick
Battery Type	NP-FM50 InfoLithium
Dimensions	134 x 91 x 156 mm
Weight	906 g (including battery and memory card)