Sony Cyber-shot DSC-F828 User Manual

54
Shooting with
Program auto
Mode dial: P
In program auto mode, the camera
automatically adjusts the shutter speed and
the aperture according to the brightness of
the subject just as in the auto adjustment
mode (mode dial: ). In addition, the
program auto mode can change the shooting
settings in the menu, a feature which the
auto adjustment mode does not have
(page 137).
Program Shift
You can change the aperture value and
shutter speed combination while keeping
the brightness fixed.
a Set the mode dial to P.
b Select the aperture value and
shutter speed combination
with the command dial.
is indicated while the aperture
value and shutter speed combination is
shifted.
c Shoot the image.
To cancel Program Shift
Turn the command dial to return the
indication from to .
• You cannot shift the aperture value and shutter
speed combination when the shutter button is
pressed halfway down.
• When the brightness changes, the aperture
value and shutter speed also change while
maintaining the shift amount.
• You may not be able to change the aperture
value and shutter speed combination depending
on your shooting situations.
• When the flash mode setting is changed,
Program Shift is canceled.
• Setting the mode dial to other than P or turning
off the power cancels Program Shift.
Mode dial
Command dial
Shutter button
8M
F2.0
80 min
250
98
FINE
MAF
P
101

Sony Cyber-shot DSC-F828 Specifications

General

Sensor Type	CCD
Sensor Size	2/3 inch
Resolution	8.0 Megapixels
Image Processor	Real Imaging Processor
Lens Type	Carl Zeiss Vario-Sonnar T*
Optical Zoom	7x
Digital Zoom	2x
Aperture	f/2.0-2.8
Shutter Speed	30 - 1/3200 sec
LCD Screen Size	1.8 inch
LCD Screen Resolution	134, 000 pixels
Viewfinder	Electronic
Focal Length	7.1-51mm
ISO Sensitivity	64, 100, 200, 400, 800
Storage Media	CompactFlash Type I/II, Memory Stick
Battery Type	NP-FM50 InfoLithium
Dimensions	134 x 91 x 156 mm
Weight	906 g (including battery and memory card)